DSP | |
DSP | 2 x 32/64bit |
Sampling Rate | 48kHz |
Latency IN to OUT | <2.9ms |
CONVERTERS | |
Resolution | 24bit AKM |
Dynamic Range | AD:110dB, DA: 115dB |
ANALOGUE | |
x8 Input/Output | Terminal block (Symmetrical) |
Analogue Input headroom | +27dBV = +30dBu |
Max. output level | +18dBV = +21dBu |
Input sensitivity @ 0dBV out | From -50dBV to +10dBV in 0.5dB step |
Input Impedance | Balanced, >4kΩ |
Phantom power | +42VDC, 5mA max. software switched |
Frequency response (-3dB) | 5Hz to 24kHz |
Flatness | better than ±0.1dB |
THD+Noise @ 1kHz, 0dBV input (line) | <0.004% |
THD+Noise @ 1kHz, -40dBV input (mic.) | <0.008% |
Output Noise floor FFT (20Hz - 20kHz) | better than 115dB |
Interchannel crosstalk (20Hz - 20kHz) | better than 90dB (100dB typ.) |
Channel Leakage (20Hz - 20kHz) | better than 100dB (115dB typ.) |
CMRR 20Hz- 20kHz | 65dB typ. |
PROCESSING | |
Input Level (x8) | Range: from Off to 0 dB |
Mute: Yes | |
Signal Polarity reverse: Yes | |
Metering: VU+clip pre & post fader | |
Output Level (x8) | Range: from Off to 0 dB |
Mute: Yes | |
Solo: Yes | |
Signal Polarity reverse: Yes | |
Metering: VU+clip pre & post fader | |
Output Gain | Range: from 0 to +6 dB |
Input Delay (x8) | from 0 to 1000 ms |
Units: sec/ms/m/cm | |
Output Delay (x8) | from 0 to 1000 ms |
Units: sec/ms/m/cm | |
Parametric Eq. Types (4 max per input) (6 max per output) | Bypass / On-Off all channels |
Param Eq. Freq: 20Hz-20kHz; Gain: -60/+12 dB; Q: 0.3 to 200 | |
Low & High Shelf 6/12 dB/oct | |
Low & High Pass 6/12 dB/oct | |
All Pass 1/2 order | |
High & Low pass output Crossover filters (x8) | Bypass On-Off |
Butterworth in 6/12/18/24 dB/oct | |
Bessel in 12/18/24 dB/oct | |
Linkwitz-Riley in 12/24 dB/oct | |
Input Noise Gate (x8) | Bypass On-Off |
Threshold: from –80 dBV to +18 dBV | |
Depth: 0 dB to 80 dB | |
Attack time: from 0,1 ms to 500 ms | |
Hold time: from 10 ms to 3000 ms | |
Release time: from 10 ms to 1000 ms | |
Input Compressor / Limiter (x8) | Bypass On-Off |
Threshold: from –36 dBV to +18 dBV | |
Ratio: 1:1 to inf:1 (limiter) | |
Knee: hard / soft | |
Attack time: from 0,1 ms to 500 ms | |
Release time: from 10 ms to 1000 ms | |
Make up gain: from 0 to +10 dB | |
Input Frequency Shifter (x4) (Feedback Loop Reducer) | Available on IN1 to IN4, ON / OFF function |
Output Limiter (x8) | Bypass On-Off |
Threshold: from -36 dbV to +18 dBV | |
Attack time: from 0,1 ms to 500 ms | |
Release time: from 10 ms to 1000 ms | |
Built in Signal Generator | Sine: from 20 Hz to 20 kHz |
Polarity: from 20 Hz to 20 kHz | |
White noise | |
Pink noise | |
Stereo Linking | Adjacent Input / Output channels |
Linked processing | |
Matrix routing linked | |
Mix Matrix | Size: 8x8 |
Vol: Input, Output, Crosspoint | |
Mute: Set/Clear individual, row, column, all | |
Input / Output, Mono / Stereo selector | |
Meter: Input / Output VU and clip | |
Pager (x3) | Input: IN1 to IN8 |
Priorities: 3 (1max, 3 min) | |
Depth: 0 dB to 80 dB | |
Attack time: from 5 ms. to 2000 ms. | |
Release time: from 50 ms. to 3000 ms. | |
Chime Source: None, Melody 1, Melody 2 | |
Chime Volume: from –12 dB to 0 dB | |
MECHANICAL | |
Dimensions | 482.6x44x266.5mm |
Weight | 3.5kg |
SUPPLY | |
Mains | 90-264VCA 47-63Hz |
Power consumption | 45VA |
MISCELLANEOUS | |
Management Connectivity | Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m. |
Remote Bus | Over twisted pairs; up to 1km (see specific specs.) |
GPI | 8, from 0 to 10VDC or TTL level |
Aux. Power Supply for Remotes & GPI | +12VDC, 1.2A max. (short circuit protected) |
Time and date retention (battery) | 100 hours aprox. (ambient temperature dependant) |
RTC accuracy | ±1 minute / month |
SOFTWARE | |
EclerNet Manager | From v3.03r4 version |